The Furl — Moissanite Ring with a Folded Ribbon Shoulder

The Furl is a moissanite ring with a folded ribbon shoulder, handcrafted in 925 sterling silver with rhodium plating. 0.7ct total of top-quality moissanite, D–E colour, VVS1 clarity, with GRA certificate. Stones on one side, a folded ribbon of metal on the other.

Product details

• Stone: 0.7ct total carat weight, round brilliant moissanite, D–E colour, VVS1 clarity — colourless and eye-clean
• Certification: GRA certificate for the centre stone, supplied with the ring
• Metal: 925 sterling silver with rhodium plating — a white-gold finish that resists tarnish
• Setting: Six-claw centre set left of middle with two four-claw accents gathered beside it, opposite a hollowed folded ribbon
• Sizes available: 10 to 20 — made to your size, never resized down from stock
• Inside the band: CERELINE engraved on every ring
• Gifting: Arrives in our presentation box with the GRA certificate
• Made to order: 7 to 15 days. We don't rush the setting — if you need it sooner, message us and we'll tell you honestly what's possible
• Lifetime replating: Free rhodium replating for life. Expect to need it every 12 to 18 months with daily wear
• Delivery: Free anywhere in Pakistan — 1–2 days in Lahore, 2–4 days elsewhere. Cash on delivery available

The stones sit off to one side. A folded ribbon of metal sweeps across the other.

A round brilliant moissanite, six-clawed, set left of centre. Two smaller moissanite sit tight against its lower right edge — not flanking it, gathered beside it. Then the band leaves the stones entirely and folds: a wide ribbon of polished metal that loops over and across, enclosing empty space.

Stones on one side, metal on the other. The head is deliberately unbalanced.

Why it isn't symmetrical

Almost every engagement ring is built on a centre line. Stone in the middle, shoulders matching left and right.

This one isn't. The stones cluster to one side, the folded metal answers on the other, and the two are balanced by weight rather than by mirroring — the ribbon is wide and bright enough to hold its own against three stones.

Asymmetry is why it looks designed rather than assembled. It also means the ring reads completely differently depending on which way your hand turns: stones from one angle, a sculptural curve from the other.

The fold

The ribbon is the hardest part of this ring to make and the easiest to overlook.

It rises off the shank, twists so its flat face turns toward you, curves over and comes back down — leaving an open gap beneath it. It is one continuous piece of metal doing a thing metal doesn't naturally want to do.

The open gap matters. A solid curve of metal this size would look heavy and sit heavy. Hollowed, it keeps the visual scale without the weight, and light passes underneath it so the edge stays bright instead of going flat.

The whole face is high-polished, with no engraving or texture, because a fold this shape only reads if the light running across it is uninterrupted.

The three stones, gathered not lined up

The centre moissanite is six-clawed and lifted. The two accents sit below and to the side of it, close in, in four claws each.

They are not placed as side stones. Side stones sit symmetrically at nine and three o'clock; these sit at four and five, tucked into the lower edge of the centre stone.

The effect is that the three read as one shape with a heavy end and a tapering tail — which is what makes the head feel like it's moving toward the fold rather than sitting still beneath it.

Moissanite matters here: the accents are small, and moissanite's stronger fire means small stones still throw visible colour. The same design in small diamonds would go quiet at that size.

The band

Slim, tapering, and it twists as it approaches the head — the flat face rolling as it rises into the ribbon. That twist is what makes the fold look like it grew out of the band rather than being attached to it. There is no join, no step, no collar. One piece of metal, changing direction.

Round-backed at the base, so it's comfortable to wear for long stretches despite what's happening at the top.

Wearing it

It sits low and close. The fold is wide but it lies almost flat along the finger, so the ring doesn't tower and doesn't catch.

It is, however, directional. Because the design isn't symmetrical, it has a correct orientation on the hand, and a slim shank can rotate. Sized properly it stays put; sized loose it will turn and the design will read wrong.

Stacking: the fold occupies one side of the ring entirely. A straight band will sit flush on the stone side and leave a gap under the ribbon. Most people wear this one alone, and it's designed to be worn that way.

What is moissanite?

Moissanite is a gemstone in its own right — silicon carbide — not an imitation of anything. It was first found in a meteorite crater, and the stones used in jewellery today are grown in a laboratory because natural moissanite is far too rare to set.

Two properties matter. It is 9.25 on the Mohs scale, harder than any gemstone except diamond, which is why it survives daily wear without the chipping that softer stones suffer. And its dispersion is roughly two and a half times that of diamond — it splits white light into visible spectral colour far more strongly. That is the fire you see: flashes of blue, green and orange where a diamond of the same size returns mostly white.

We say moissanite plainly on every page. It is not sold here as a diamond and never will be.

Why silver, and not gold?

Because the stone is the point. A heavy gold setting adds a great deal of money for metal that sits underneath the stone and is barely seen.

Rhodium-plated 925 sterling silver gives the same bright white-gold finish, keeps the budget in the stone and the setting, and our lifetime replating means the finish stays white for as long as you own the ring. If you would prefer this design in gold, message us on WhatsApp and we'll quote it.

Marked inside

CERELINE is engraved on the inner shank, where only the wearer sees it. Not ornament — provenance.

Made to order

Made in your size after you order, in 7 to 15 days. The shank is plain at the base, so resizing happens well away from the fold and the setting. Because orientation matters on this design, tell us if you're between sizes.

Care

Rhodium plating doesn't tarnish, but it does wear. With daily use expect to need replating every 12 to 18 months — sooner if you're hard on your hands. It's free, for life. Store the ring in its box when you aren't wearing it, and put it on last, after perfume and hand cream.

The gap under the fold traps soap and hand cream, and you can't see into it from above. Warm water, a drop of washing-up liquid, a soft toothbrush through the gap under the fold from both ends, then around the claws and under the stones. Rinse and dry thoroughly, then a pass with any soft dry cloth over the ribbon. Monthly.

Remove for chlorinated water, household chemicals and fragrance.

Frequently asked questions

Does it come with a certificate?
Yes. The centre stone ships with its GRA certificate. The two accent stones are moissanite as well, but a separate certificate for every small stone isn't practical, so we certify the centre.

Is moissanite the same as cubic zirconia?
No. Cubic zirconia is softer, clouds with wear and has far less fire. Moissanite is 9.25 on the Mohs scale and holds its brilliance for life. They are not comparable materials and they are not comparably priced.

Will the plating wear off?
Eventually, yes — that is true of every rhodium-plated piece, at any price, including white gold. With daily wear expect 12 to 18 months. Ours is free to replate for life, so it is never a reason not to buy.

How do I find my ring size?
We make sizes 10 to 20. Use the size guide on this page, or message us on WhatsApp at +92 371 4323294 and we'll walk you through measuring. This design is directional, so size it precisely.

How long will it take?
7 to 15 days, made to order in our Lahore workshop. If you have a date to meet, tell us and we'll be honest about whether we can make it.

Where do you deliver?
Anywhere in Pakistan, free of charge. We make everything at our bench in Lahore, so Lahore orders arrive fastest — 1–2 days once the piece leaves the workshop, and 2–4 days elsewhere in Pakistan. Cash on delivery is available countrywide; because every piece is made to your size and cannot be resold as it stands, we take a 10% advance before we start and the remaining 90% is paid to the courier on delivery. You are also welcome to collect in person from our shop at Shop No. 15, Square 99 Mall, Bahria Town, Lahore.

What if it isn't right?
Cancel free within 24 hours of ordering. After delivery you have 5 days for a refund and 30 days to exchange, plus one free resize within 30 days. Engraved and custom pieces are exchange-or-resize only.

What arrives

Your ring in our presentation box, with its GRA certificate. Delivered free anywhere in Pakistan, in packaging that doesn't announce what's inside.